verilog

*Verilogメモ
[[index]]
#contents

**ifdef
>`define XYZ
>`ifdef XYZ
>`ifndef XYZ
>`else
>`elsif
>`endif

**timescale

>`timescale 1ns / 10ps

1nsは#1=1nsの設定
10psはシミュレーションの最小単位時間

**Reset(Lattice)
Lattice HDL Coding Guidelines 2012
HDLcodingguidelines.pdf
同期リセットなのでposedgeなのがポイント
P27 &img(fig19.png);

HDL Synthesis Coding Guidelines for Lattice Semiconductor FPGAs TN1008_02.1 October 2005
behaviouralVerilogSM-1.pdf
リセットはnegedgeなのがポイント
12-14 &img(tn1008_gsr.png);

**FIFO
2020-08-11作成
シミュレーション専用

>module fifo_dcx (Data, WrClock, RdClock, WrEn, RdEn, Reset, Q, Empty, Full)
>    input wire [31:0] Data;
>    input wire WrClock;
>    input wire RdClock;
>    input wire WrEn;
>    input wire RdEn;
>    input wire Reset;
>    output reg [31:0] Q;
>    output wire Empty;
>    output wire Full;
>
>    assign Full = 1'b0;
>    assign AlmostEmpty = 1'b0;
>    assign AlmostEmpty = 1'b0;
>
>    reg [31:0] mem[0:127];//32bit width, 128 registers
>
>    reg [7:0]   index_wr;
>    reg [7:0]   index_rd;
>
>    always @(posedge WrClock or posedge Reset)begin
>        if(Reset)
>        begin
>            index_wr <= 0;
>        end
>        else if(WrEn)
>        begin
>            mem[index_wr] <= Data;
>            index_wr <= index_wr + 8'd1;
>        end
>    end
>
>    always @(posedge RdClock or posedge Reset)begin
>        if(Reset)
>        begin
>            Q <= 32'h00000000;
>            index_rd <= 0;
>        end
>        else if(RdEn)
>        begin
>            Q <= mem[index_rd];
>            index_rd <= index_rd + 8'd1;
>        end
>    end
>
>    assign Empty = index_wr == index_rd;
>endmodule

end.

2026-03-23 06:28:29 32400